Galvanizing lines |
Magadh can offer galvanizing lines for strip width upto 1650 mm, process speed upto 180 MPM and strip thickness of 4.5 mm to 0.12 mm. Coating technology offered are non-ox, heat to coat and wet flux.
|
The main features are: |
| 1. |
Inline skin pass mills |
| 2. |
Inline tension levelers |
| 3. |
Minimum coating of 55 GSM |
| 4. |
Caster jet cooling |
| 5. |
Vertical furnace |
| 6. |
Minimum spangle |
|
Magadh can also offer Zn+Al coating lines with induction pot technology.
|
Tinning Lines |
Magadh can offer tinning lines for strip width upto 1250 mm, process speed upto 120 MPM and strip thickness of 0.63 mm to 0.09 mm.
|
The main features are: |
| 1. |
Minimum coating of 4 GSM |
| 2. |
Tin free coating also offered |
| 3. |
Ferro-stan technology |
| 4. |
Inline tension leveler |
|
Colour Coating lines: |
Magadh can offer colour coating lines for strip width upto 1650 mm, process speed upto 80 MPM and strip thickness of 1.2 mm to 0.3 mm.
|
The main features are: |
| 1. |
Reverse roll coaters |
| 2. |
Infra red baking chambers |
| 3. |
Energy saving incinerator |
| 4. |
Inline tension leveler |
|
Furnaces |
| Magadh can offer vertical (Inverted U and L Type) a well as horizontal Non-Ox/Oxidizing Annealing and Galvanizing furnaces, for strip width up to 1650 mm, thickness up to 4.2 mm and capacity 80 TPH. |
Main Features are: |
| 1. |
Furnace can be equipped with recuperative technology non-ox burners |
| 2. |
Gas and Electric fired Radiant Tubes in HN Grade. |
|
| |
